Brief description of national standard products of corrosion and scale inhibitors
Corrosion and scale inhibitors are composed of organic phosphonic acid, polycarboxylic acid, sulfonate-containing copolymers, azoles, etc., and are effective against calcium carbonate, calcium phosphate, etc. in water. It has good chelating and dispersing effect, and has good corrosion inhibition effect on carbon steel and copper.
Product Features
The corrosion and scale inhibitor has strong scale inhibition and good corrosion inhibition effect, and can operate at high concentration rates
Can operate at high values without adding acid
Can be used in Operate in a system with calcium hardness and alkalinity >/
The thermal resistance of dirt is less than or equal to 3㎡
The corrosion rate of carbon steel equipment is ./, the corrosion rate of copper alloy and stainless steel
Main corrosion and scale inhibitors Used for scale and corrosion inhibition in circulating cooling water systems, such as circulating cooling water systems in power plants, chemical plants, central air conditioners, etc.
Typical indicators
Appearance of corrosion and scale inhibitor: colorless to light amber liquid
Solid content:
Total phosphorus content (based on 3-):
Density (℃)/3:
(aqueous solution):
This is a typical corrosion and scale inhibitor nature, but should not be considered an indication of product availability.
Application and dosage
Dosing method of corrosion and scale inhibitor: For convenience of use, it can be added continuously at the inlet of the circulation pump through a dosing pump or adjusting valve
Amount of dosing: General dosing The amount is between (based on the amount of supplementary water), and the most suitable dosage should be determined by testing water samples
Packaging and storage
Corrosion and scale inhibitors are packaged in or plastic barrels. The product shelf life is months.
Safety and Protection
Pay attention to labor protection when using corrosion and scale inhibitors. Avoid contact with skin, eyes, etc., and rinse with plenty of water after contact.
Corrosion and scale inhibitors